Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Rilsan® Clear G170 - PA* - ARKEMA

Check here, which other Rilsan Clear datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 전기적 특성 - 기타 특성 - 도표

Any use of this information falls under the rules of our disclaimer.

제품 설명서

PA,,MT,C12-020

Rilsan^® Clear G170 is a high performance transparent polyamide resin with outstanding thermal resistance.  This grade has been designed for injection molding applications.

Main applications:

• Coffee machine, Fuel filter container, Inner layer of fiber optic, Copper telephone cables resistant to rodents, power cables resistant to rodents.
• Note: This grade is not recommended by Arkema for usage in medical applications. For such applications Rilsan^® Clear G170 MED should be used.

Packaging:
This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.

Shelf Life:
Two years from the delivery. For any use above this limit,  please refer to our technical services.

Processing/Physical Characteristics	건조/응축	단위	시험규격
ISO 데이터
용융 부피 - 흐름 속도, MVR	2 / *	cm³/10min	ISO 1133
온도	275 / *	°C	-
하중	2.16 / *	kg	-
성형 수축률, 평행	1.1 / *	%	ISO 294-4, 2577
성형 수축률, 수직	1.1 / *	%	ISO 294-4, 2577

기계적 특성	건조/응축	단위	시험규격
ISO 데이터
인장탄성률	2100 / 2020	MPa	ISO 527
항복강도	76 / 74	MPa	ISO 527
항복변형률	8 / 9	%	ISO 527
파단시 평균신율	>50 / >50	%	ISO 527
챠피 노치드 충격 강도, +23°C	- / 13	kJ/m²	ISO 179/1eA
챠피 노치드 충격 강도, -30°C	- / 13	kJ/m²	ISO 179/1eA
쇼어 D 경도	79 / *	-	ISO 7619-1

열적 특성	건조/응축	단위	시험규격
ISO 데이터
유리 전이 온도, 10 °C/min	168 / *	°C	ISO 11357-1/-2
하중하에서의 변형온도, 1.80 MPa	136 / *	°C	ISO 75-1/-2
하중하에서의 변형온도, 0.45 MPa	150 / *	°C	ISO 75-1/-2
비카트 연화 온도, B	160 / *	°C	ISO 306
선형 열팽창 계수, 평행	70 / *	E-6/K	ISO 11359-1/-2
1.5mm 평균두께에서의 난연성	V-2 / *	class	IEC 60695-11-10
테스트 두께	1.6 / *	mm	-
Yellow Card 유효한	예 / *	-	-
산소지수로서의 난연성	26 / *	%	ISO 4589-1/-2

전기적 특성	건조/응축	단위	시험규격
ISO 데이터
부피 저항	- / 1E11	Ohm*m	IEC 62631-3-1
표면 저항	* / 1E12	Ohm	IEC 62631-3-2
전기 압력	- / 50	kV/mm	IEC 60243-1
CTI	* / 600	-	IEC 60112

기타 특성	건조/응축	단위	시험규격
물에서의 흡수성	3.8 / *	%	ISO 62와 유사
조건에서의 흡습성	1.7 / *	%	ISO 62와 유사
밀도	1050 / 1050	kg/m³	ISO 1183

도표

특징

생산 공정

사출 성형, 기타 압출

인도 유형

펠렛 (입자,알갱이)

특별 특성

투명도

지역별 검색

쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧

기타 정보

사E성

Injection molding conditions:
- Typical melt temperature  (Min / Recommended / Max)  : 270°C / 290°C / 310°C.
- Typical mold temperature  : 40 - 80 °C.
- Dyring time and temperature (only for bags opened for more than two hours): 4 - 6 hours at 90°C.

필름 압출

Extrusion conditions:
- Typical melt temperature  (Min / Recommended / Max)  : 270°C / 280°C / 290°C
- Dyring time and temperature (only for bags opened for more than two hours): 4 - 6 hours at 90°C

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.